Solid State Timers
|
| Input voltage application starts preset time delay. At end of delay load turns ON. Remove input voltage to reset.
Input voltage is continuous. Closing
the initiate switch turns the load ON. Preset delay time starts
when initiate switch opens. At the end of the delay time, the
load turns OFF. Reset is automatic.
Input voltage application turns load ON and starts preset time interval. At the end of the preset interval, the load turns OFF. Remove input voltage to reset.
Input voltage is continuous.
Closing the Initiate switch turns the load ON and starts the preset
time delay. At the end of the preset delay the load turns OFF.
Reset is automatic.
When input voltage is applied the load cycles ON/OFF (reverse sequence available). Equal ON/OFF times. Remove input voltage to reset. When input voltage is applied, the load cycles ON-OFF...Reverse sequence available. Unequal ON/OFF times are independently adjustable. Remove input voltage to reset. 7. 63 PROGRAMMABLE CYCLE WITH INTERVAL TIMERS 8. PERCENT TIMERS: When input voltage is applied, the load cycles ON-OFF...ON and OFF times are varied inversly by a potentiometer with 2 resistive elements on a common shaft. Increasing the ON time also decreases the off time while holding the total time (ON plus OFF) constant. Remove input voltage to reset.
9. RETRIGGERABLE ONE-SHOT TIMERS Input voltage is continuous. Closing the initiate switch turns the load ON and starts the pre-set time interval. Subsequent operation of the initiate switch will re-start the time interval while holding the load ON. At the end of the time interval, the load turns OFF. Reset is automatic.
Input voltage is continuous. Closing the initiate switch turns the load ON and starts the pre-set time interval. Subsequent operation of the initiate switch will re-start the time interval. While holding the load ON. At the end of the time interval, the load turns OFF. Reset is automatic.
Input voltage application starts the pre-set time interval. At the end of the delay time, the load turns ON, and the pre-set time interval starts. When the interval delay time ends, the load turns OFF. Delay/interval times are independently adjustable. Remove input voltage to reset.
When input voltage is applied, the load pulses ON-OFF...until the time interval is completed. Equal ON/OFF times. Pulse and interval times are independently adjustable. Remove input voltage to reset.
55. ALTERNATING TIMERS: Application of input voltage activates the flip flop action of two separate loads. Both ON times and OFF times are equal. Remove input voltage to reset.
96. DUAL OUTPUT MOTOR REVERSING TIMERS: Input voltage application causes load 1 to turn ON. When pre-set time has elapsed load 1 turns OFF for a pre-set OFF time. Load 2 now turns ON then turns OFF. The cycle now repeats. ON/OFF times are independently adjustable. Remove input voltage to reset. American Control Products - Quality Industrial Controls, Precision Electronic Timers, Electric Pneumatic Timers, Appliance Control Defrost Timers, Time Delay Relays, Motor Driven Timers, Programmable Timers, Switch Timers, Electrical Timers, Sequencers and Microcontroller solutions. Let us assist in applying one of our standard timing modes using the best choice of solid state or electromechanical timers to solve your most demanding application. We are also capable of Microcontroller solutions using the latest Microprocessor technology. No matter if your order is for 1 or 10,000 pieces, all timers are subjected to the same rigid Quality Inspection procedures to insure the product shipped will meet its specifications. |
Home
| Solid
State Timers | SS1
Amp Output | SS5,
10, 15a Output | SS10
Amp Relay Output
SS30
Amp Relay Output | E/M
Panel Mount | E/M
Chassis Mount | E/M
Reset Timer
E/M
Power Heads | New
Products | Site Map
Precision Timer, a division of
Prime Technology
344 Twin Lakes Road
North Branford, CT 06471
Ph:
(203) 481-5721 • Fax:
(203) 481-8937
E-Mail: sales@primetechnology.com
PPrecision
Timer,
a division of
Prime Technology
344 Twin Lakes Road
North Branford, CT 06471
Ph: (203) 481-5721
Fax: (203) 481-8937
E-Mail: sales@primetechnology.com
Copyright © 2013












